5 gallon bottle blowing machine
5 Gallon Bottle Blow Molding Machine
RGT for the production of blow machines (PEI) for the production of drinking water bottles and oil bottles with a capacity of 3 ~ 5 gallons, as well as made on request.
The blowing machine is suitable for producing PET plastic containers in multiple sizes m3 ~ 5 gallon and is widely used for producing water and oil bottles.
Double adoption to adjust output, the blowing system is stable and fast,
Relying on infrared rays by the oven to heat small packages before blowing them while it works in a circular motion
The air system has been divided into two parts: an air part to operate the conveyor belt for small packages before and after inflating them and what requires work, and the other part to inflate the packages
It provides enough high pressure to inflate cans into its mold
The device is also equipped with a muffler and a lubrication system to lubricate the mechanical part.
Reduced maintenance and operating cost
Ease of use and safety of the machine from the dangers when switching over.
|Perform inner diameter||mm||?30|
|MOULDING||Max.mould plate dimension(LxW)||mm||620×620|
|Mould opening stroke(ADJUSTABLE)||mm||350|
|AIR COMPRESSOR||High pressure compressor||M3/MPa||?0.60/3.0|
|Air pressure for blowing||KW||11|
|Low pressure compressor||M3/MPa||?0.8/1.25/7.5|
|ELECTRICITY OF MAIN MACHINE||Power||KW||15/9|
|MACHINE SIZE AND WEIGHT||Main machine(LxWxH)||M||2.3×0.85×2.2|
|Main machine weight||T||1.35|
|High pressure compressor(LxWxH)||M||1.90×0.75×1.5|